A new series of digimatic callipers derived from 30 years of accumulated Mitutoyo technologies. Equipped with the electromagnetic induction type absolute encoder and AOS (Advanced Onsite Sensor) applied for ABS coolant-proof callipers.
- Patent registered (in Japan, USA, China, Germany, UK, France, Switzerland and India)
- Design patent pending (in Japan, USA, EU and China)
- The new electromagnetic inductive sensor repels dirt, oil and water ensuring 100% accuracy
The ABS (absolute) scale requires no origin setting after power-on and also has no limit to response speed.
- Battery life of approximately 3.5 years has been achieved under normal use through the adoption of Mitutoyo’s ABSOLUTE scale.
- The slider configuration features an ergonomic, thumb-friendly shape.
- Step measurement is capable.
- Font height: 9mm, alleviation of fatigue with the high-contrast LCD.
- Carbide-tipped jaw models are ideally suited to the measurement of rough-machined workpieces, castings, grindstones, etc.
- The data output function allows integration into statistical process control
and measurement systems.
Common Specifications
- Resolution: 0.01mm
- Repeatability: 0.01mm
- Power supply: Button-type silver oxide battery
SR44 (No. 938882), 1 piece supplied as standard
(The standard supplied battery is for the monitor.) - Battery life: Approx. 3.5 years under normal use
- Maximum response speed: Unlimited
Functions
ABS (absolute) measurement function:
Enables absolute-mode measurement to be started without any zero-setting after switch-on. The absolute origin position can be set, or reset, with the ORIGIN switch at any time.
INC (incremental) measurement function:
Enables the display value to be set to zero, temporarily, at the current slider position to enable easy incremental-mode measurement.
Low battery alarm:
Indicates (with a ‘B’ symbol in the display) that the battery needs replacing. This allows timely battery replacement before the calliper becomes unusable.
External output function:
Allows measurement data to be exported using the optional data cable.
Hold function:
Allows a display value to be held using the optional Data Hold unit. (This function cannot be used along with the external output function.)
Specifications
Metric
| Order No. | Range | Accuracy | Mass | Measurement data output port | Thumb roller | Remarks |
| 500-150-30 | 0-100mm |
±0.02mm |
143 g | ✔ | ✔ | Depth bar ø1.9mm rod |
| 500-180-30 | – | – | ||||
| 500-151-30 |
0-150mm |
168 g |
✔ |
✔ |
– | |
| 500-154-30 | Carbide-tipped jaws for outside measurement | |||||
| 500-155-30 | Carbide-tipped jaws for outside and inside measurement | |||||
| 500-158-30 | Depth bar ø1.9mm rod | |||||
| 500-181-30 | – | – | – | |||
| 500-152-30 |
0-200mm |
198 g |
✔ | ✔ | – | |
| 500-156-30 | Carbide-tipped jaws for outside measurement | |||||
| 500-157-30 | Carbide-tipped jaws for outside and inside measurement | |||||
| 500-182-30 | – | – | – |
Inch
| Order No. | Range | Accuracy | Mass | Measurement data output port | Thumb roller | Remarks |
| 500-170-30 | 0-4″ |
±0.001″ |
143 g | ✔ |
✔ |
Depth bar ø3/40″ rod |
| 500-195-30 | – | |||||
| 500-171-30 |
0-6″ |
168 g |
✔ |
– | ||
| 500-174-30 | Carbide-tipped jaws for outside measurement | |||||
| 500-175-30 | Carbide-tipped jaws for outside and inside measurement | |||||
| 500-178-30 | Depth bar ø3/40″ rod | |||||
| 500-196-30 |
– |
– | ||||
| 500-159-30 | Carbide-tipped jaws for outside measurement | |||||
| 500-160-30 | Carbide-tipped jaws for outside and inside measurement | |||||
| 500-172-30 |
0-8″ |
198 g |
✔ | – | ||
| 500-176-30 | Carbide-tipped jaws for outside measurement | |||||
| 500-177-30 | Carbide-tipped jaws for outside and inside measurement | |||||
| 500-197-30 |
– |
– | ||||
| 500-163-30 | Carbide-tipped jaws for outside measurement | |||||
| 500-164-30 | Carbide-tipped jaws for outside and inside measurement |
Optional Accessories
- Data Hold unit
Order No.959143 - USB direct input tool
USB-ITN-C (2m): Order No.06ADV380C
- Connecting cable
Used for input tool DP-1VR or MUX-10F.
1m cable: Order No.959149
2m cable: Order No.959150 - U-WAVE-T dedicated connecting cable
Cable for standard use: Order No.02AZD790C
Cable for foot switch: Order No.02AZE140C
Dimensions
Reviews
There are no reviews yet.